0.9 degree Casun Closed Loop Stepper Motor 440mN.M 42x48mm Stepper Motor With Nema 17 Stepper Motor Controller
Nema17 Closed Loop Stepper Motor 440mN.m 1.68Amp with Encoder
The Casun Closed Loop Stepper Motor you mentioned is a specific model with the following specifications:
Step Angle: 0.9 degrees per step
Holding Torque: 440mN.m
Size: 42x48mm
This stepper motor is designed to provide precise positioning and control. The 0.9-degree step angle means that the motor will move 0.9 degrees with each step. This finer resolution allows for more accurate positioning compared to motors with larger step angles.
The holding torque of 440mN.m indicates the motor's ability to hold its position when not in motion. This torque value specifies the maximum torque the motor can exert without losing steps.
Features:
-
Bipolar or unipolar versions available
-
Hybrid stepper construction
-
Available in single or double shaft versions
-
CE and RoHS approved
-
Customizations on request
Motor Specifications
| Step Angel | 1.8 ° |
| Fram Size | 42 mm |
| Number of Phase | 2 Phase |
| Rated Current | 1.68Amp |
| Holding Torque | 440mN.m |
| Resistance | 1.65hm |
| Inductance | 4.8mH |
| Rotor Inertia | 72g-cm² |
| Motor weight | 0.38 kg |
| Encoder Pulsh | 400PPR |
| Connection | Bipolar |
Operating Specifications
Motor
Step Angle: 1.8°
Maximum Temperature :80°C maximum
Ambient Temperature: -20 °C to 50°C
Storage Temperature -20: °C to 100°C
Humidity Range (%) :85% or less, non-condensing
Magnet Wire Insulation :Class B 130 deg C
Insulation Resistance :100M Ohm at 500 VDC
Dielectric Strength :500 VDC for 1 min
Encoder
can customized
Voltage: 5 v
Output: A + A - B + B -
Torque Curves
Submodels
| Model | Holding Torque | Step Angle | Length | Type of Shaft | Rated Current |
| 42SHD4950 | 0.13N.m | 1.8° | 20mm | D Shaft-20mm | 1.0A |
| 42SHD4003 | 0.26N.m | 1.8° | 34mm | D Shaft-20mm | 0.4A |
| 42SHD0261 | 0.45N.m | 1.8° | 40mm | D Shaft-20mm | 1.68A |
| 42SHD4425 | 0.59N.m | 1.8° | 48mm | D Shaft-24mm | 2.0A |
| 42SHD4813 | 0.8N.m | 1.8° | 60mm | D Shaft-24mm | 2.1A |
Download
If our standard motor cannot meet your needs,
we can customize the motor according to your needs
Customized content includes but is not limited to special shafts, winding parameters, installation dimensions, lead wires with special requirements, connectors, etc.
Options:
Encoder | Brake | Gearbox | Shaft
Please click the "Get a quote" button below to tell us your requirements.
Product Tags:
|
|
0.9 Degree 400 Ppr Encoder Step Motor 440mN.M 42x48mm Close Loop Nema 17 Images
|
